Green coal for power - To take care of post-Kyoto issues from energy security point-of-view:

Green coal for power - To take care of post-Kyoto issues from energy security point-of-view:

a. Coal is the world’s most abundant and important source of primary energy. Turning a potential pollutant into a clean, green fuel for economical power production has become a matter for concern on a global scale. Coal continues to dominate the energy industries as the single most important and widely-used fuel. Delivering around 27 per cent of the world’s consumption of primary energy, almost half of which is used for electricity generation; reserves of coal are spread worldwide throughout some 100 developed and developing countries, sufficient to meet global needs for the next 250 years.

b. Although a combination of economic and environmental pressures has forced the closure of older, inefficient, fossil fuelled thermal stations, the massive growth in power demand on a world scale will continue to be met predominantly by coal-fired plant for the foreseeable future. In many of the rapidly developing and industrializing regions of the world the rate of consumption of coal as a primary fuel for electricity generation is actually increasing. In energy-hungry India alone, coal-burn for power generation is forecast to more than double in the next few years to 350 million tonnes per year. Annual coal production in China, the world’s largest producer, has rocketed to over 1,500 million tonnes. Nevertheless, post-Kyoto issues have heightened environmental awareness, forcing the pace of technological change in the use of this abundant but potentially polluting fuel for power generation. The environmental threat posed by the release of even more millions of tonnes of toxic pollutants, acidic and greenhouse gases from both new and existing coal-burning power stations is widely accepted. Currently, signatories to the Kyoto Protocol are focusing on solutions to the problem of global warming, including the reduction of CO2 and other ‘greenhouse’ gases. In many other non- signatory countries, major programmes have been implemented by utilities and power producers to reduce SOx, NOx and CO2 emissions. Additional environmental concerns have also emerged, including the potential health impacts of trace emissions of mercury and the effects of particulate matter on people with respiratory problems.

c. In contrast with both natural gas and LPG, hard coal can contain a wide range of compounds including sulfur in addition to useful hydrocarbons. The percentage of sulfur can vary widely, with relatively low concentrations in the highest quality anthracite and very high amounts in lignite, generating large volumes of SOx. As well as the need to treat the fuel prior to firing and control closely the combustion process itself to limit the production of nitrogen oxides, coal-fired stations based on conventional pulverized coal technology can only reduce SOx emissions through the use of post-combustion treatments. Further problems still remain through the safe disposal of fly ash which can contain high levels of toxic compounds including heavy metals.

d. Enormous environmental problems faced by operators of older, coal-fired generating plants all over the world, plants were forced to take drastic action after various public protests about the deadly effects of SOx emissions and other emissions. Emissions from coal and lignite-fired units at various power generating stations caused widespread damage, killing livestock and crops downwind of the plant and causing respiratory illness in the population in many countries. The plants were forced to cut output. This tends to place an unacceptably high strain on the commercial viability of an existing power station in many of the developing nations and represents a completely uneconomic option for the majority of obsolescent installations. Power producers in industrialized developed countries are therefore adopting a variety of leading-edge clean-coal technologies for electricity generation.

e. New clean coal technologies are providing an attractive and economically viable option to post-combustion systems. Applying the latest combustion, steam and process technologies in new power plant or upgrading existing coal-fired generating facilities provides significant improvements in thermal efficiency, reducing environmental impact and energy costs to the consumer. At the same time, higher thermal efficiencies result directly in reduced fuel costs, improving profitability and market position for the independent power producer.

(i) For new and smaller coal-fuelled generating plant, boilers using well-proven circulating fluidized-bed CFB technology provide a cost-effective and efficient system capable of meeting current and future environmental standards. They are now being widely used and successfully operated in coal-fired generating units, burning a very wide range of coal and other fuels with widely differing heat values and mineral content. These can typically include anthracite, semi-anthracite, bituminous and sub-bituminous coal, lignite and even ‘gob’ – a form of high-ash bituminous coal waste.

(ii) As an alternative to direct combustion based systems, coal gasification is becoming increasingly attractive, with Integrated Gasification Combined Cycle (IGCC) technology offering one of the best ‘clean’ options for effective power production. Gasification systems use steam and controlled amounts of air or oxygen under high temperatures and pressures to react with coal to form clean synthetic gas or ‘syngas’. Current systems provide efficient clean-up of the gas-stream to produce a mixture of carbon monoxide and hydrogen which can be used subsequently as a ‘clean’ fuel or a basic feedstock for liquefaction.

f. Used as a fuel for power generation in a typical IGCC generating plant, a syngas-fired gas turbine drives a generator, with exhaust heat from the gas turbine recovered to produce steam to power a steam turbine in conventional ‘combined cycle’. IGCC power generating systems are presently being developed and operated in Europe and the US, with commercial systems capable of operating at thermal efficiencies approaching 50 per cent. NOx and Sox emissions levels are minimized with the potential for carbon-capture and sequestration of the CO in the sysngas stream being actively researched as design strategies for near-term and future coal-based IGCC plants. Elemental sulfur is removed from the syngas before combustion and is a highly saleable commercial byproduct. If the gasifier is fed with oxygen rather than air, the flue gas contains highly concentrated CO2 which can readily be captured, at about half the cost of that from conventional plants.

g. As an alternative to the direct use of syngas as a fuel for electricity generation, it can also be processed using modern gas-to-liquids (GTL) technologies to produce a wide range of liquid hydrocarbon fuels such as gasoline and diesel oil. Coal-to-oil is a long-established technology in coal-rich South Africa.

h. Nevertheless, clean coal technology is moving very rapidly in the direction of coal gasification, with a second stage designed to produce a concentrated and pressurized carbon dioxide stream followed by separation and geological storage. This has the potential to provide extremely low emissions of conventional coal pollutants, and as low-as-engineered carbon dioxide emissions – a vital step in the fight to prevent irreversible climate change.

Water pollution, its prevention and control:

Water pollution, its prevention and control:

Water is a key resource for our quality of life. It also provides natural habitats and eco-systems for plant and animal species. Access to clean water for drinking and sanitary purposes is a precondition for human health and well-being. Clean unpolluted water is essential for our ecosystems. Plants and animals in lakes, rivers and seas react to changes in their environment caused by changes in chemical water quality and physical disturbance of their habitat.

Water pollution is a human-induced change in the chemical, physical, biological, and radiological quality of water that is injurious to its existing, intended, or potential uses such as boating, waterskiing, swimming, the consumption of fish, and the health of aquatic organisms and ecosystems. Thus, the discharge of toxic chemicals from a pipe or the release of livestock waste into a nearby water body is considered pollution. The contamination of ground water, rivers, lakes, wetlands, estuaries, and oceans can threaten the health of humans and aquatic life.

Contaminants have a significant impact on aquatic ecosystems. for example, enrichment of water bodies with nutrients (principally nitrogen and phosphorus) can result in the growth of algae and other aquatic plants that shade or clog streams. Direct exposures to toxic chemicals such as pesticides, is also a health concern for individual aquatic plants and animals. Without healthy water for drinking, cooking, fishing, and farming, the human race would perish. Clean water is also necessary for recreational interests such as swimming, boating, and water skiing.

A. Sources of Water Pollution: Sources of water pollution are generally divided into two categories. The first is point-source pollution, in which contaminants are discharged from a discrete location. Sewage outfalls and oil spills are examples of point-source pollution. The second category is non-point-source or diffuses pollution, referring to all of the other discharges that deliver contaminants to water bodies.

Numerous manufacturing plants pour off undiluted corrosives, poisons, and other noxious byproducts to water streams. The construction industry discharges slurries of gypsum, cement, abrasives, metals, and poisonous solvents. The mining industry also presents persistent water pollution problems. In yet another instance of pollution, hot water discharged by factories and power plants causes so-called ‘thermal pollution’ by increasing water temperatures. Such increases change the level of oxygen dissolved in a body of water, thereby disrupting the water's ecological balance, killing off some plant and animal species while encouraging the overgrowth of others. Towns and municipalities are also major sources of water pollution.

In many public water systems, pollution exceeds safe levels. One reason for this is that much groundwater has been contaminated by wastes pumped underground for disposal or by seepage from surface water. When contamination reaches underground water tables, it is difficult to correct and spreads over wide areas. Discharge of untreated or only partially treated sewage into the waterways threatens the health of their own and neighboring populations as well. Along with domestic wastes, sewage carries industrial contaminants and a growing tonnage of paper and plastic refuse. Although thorough sewage treatment would destroy most disease-causing bacteria, the problem of the spread of viruses and viral illness remains. Additionally, most sewage treatment does not remove phosphorus compounds, contributed principally by detergents.

B. Dangers of Water Pollution: Virtually all water pollutants are hazardous to humans as well as lesser species; sodium is implicated in cardiovascular disease, nitrates in blood disorders. Mercury and lead can cause nervous disorders. Some contaminants are carcinogens. DDT is toxic to humans and can alter chromosomes. Along many shores, shellfish can no longer be taken because of contamination by DDT, sewage, or industrial wastes.

C. Prevention and Control of Water Pollution: Sewage should be treated before it is discharged into the river or ocean. This is possible through modern techniques.

Sewage is first passed through a grinding mechanism. This is then passed through several settling chambers and neutralized with lime. Up to this stage, the process is called primary treatment. The sewage still contains a large number of pathogenic and non-pathogenic organisms, and also sufficient quantity of organic matter. The neutralized effluents are sent to UASB (up-flow anaerobic sludge blanket). It is a reactor. In this, the anaerobic bacteria degrade the biodegradable material present in the waste water. This removes foul odor and releases methane, which can be used elsewhere. In this system, the pollution load is reduced upto 85 percent. After this, water is sent to aeration tanks where it is mixed with air and bacteria. Bacteria digest the organic waste material. This is called biological or secondary treatment. Even after the treatment, water is not yet fit for drinking. The harmful microorganisms need to be killed. The final step (tertiary treatment) is, therefore, a disinfection process, to remove final traces of organics, bacteria, dissolved inorganic solids, etc. For tertiary treatment, methods, such as chlorination, evaporation, and exchange absorption may be employed. These depend upon the required quality of the final treatment.

Apart from the above, you should also adopt the following practices:

(i) Waste food material, paper, decaying vegetables and plastics should not be thrown into open drains.

(ii) Effluents from distilleries, and solid wastes containing organic matter should be sent to biogas plants for generation of energy.

(iii) Oil slicks should be skimmed off from the surface with suction device. Sawdust may

be spread over oil slicks to absorb the oil components.

Fludised Bed Combustion (FBC) technology uses coal washery rejects / fines for power supply

Fludised Bed Combustion (FBC) technology uses coal washery rejects / fines for power supply - An eco-friendly system eases pressure of disposal problem.

In developing countries, most of energy is generated by coal fired power plants. For quality purpose, coals are washed. Disposal of huge rejects and fines obtained from coal washery are a problem everywhere. Fludised Bed Combustion (FBD) technology as the renewable source of energy generates eco-friendly power supply using washery rejects and washery fines.

The objectives of coal-fired power generation is to have (1) power generation at a economical cost; (2) to improve thermal efficiency; (3) to comply with current and future environmental standards. Many of these objectives may be gained by the FBC technology based plants, with incorporation of supercritical steam cycles together with some form of flue gas desulphurisation and low NOx measures.

Advanced FBC system represents significant advantages over conventional coal combustion system. This technology uses a more compact boiler and very high rate of heat transfer to the tube surfaces in the bubbling bed; thus, level of NOx and SOx generated is much less, which is a good indication of pollution control. Generation of particulates is also less as compare to the conventional system.

Above all, it can utilize effectively coal washery rejects, coal washery fines, lignite etc. Utilizing coal washery rejects and coal washery fines means easing pressure for disposal problem of these materials.