‘FutureGen’ project - to design, build and operate a nearly emission-free coal-based electricity and hydrogen:

‘FutureGen’ project - to design, build and operate a nearly emission-free coal-based electricity and hydrogen:

The clean coal technology field is moving very rapidly in the direction of coal gasification with a second stage so as to produce a concentrated and pressurised carbon dioxide stream followed by its separation and geological storage. At present the high cost of carbon capture and storage renders the option uneconomic. But a lot of work is being done by many of the research institutes, to improve the economic viability of this system.

More recently department of energy (DOE) of Federal Govt. of the USA has announced ‘FutureGen’ project to design, build and operate a nearly emission-free coal-based electricity and hydrogen production plant. It will use cutting-edge technologies to generate electricity while capturing and permanently storing carbon dioxide deep beneath the earth. The integration of these technologies is what makes FutureGen unique. Researchers and industry have made great progress advancing technologies for coal gasification, electricity generation, emissions control, carbon dioxide capture and storage, and hydrogen production. But these technologies have yet to be put together and tested at a single plant - an essential step for technical and commercial viability.

Therefore, the FutureGen initiative would have comprised a coal gasification plant with additional water-shift reactor, to produce hydrogen and carbon dioxide. About one million tones of CO₂ would then be separated by membrane technology and sequestered geologically. The hydrogen would have been be burned in a power generating plant and in fuel cells. The project was designed to validate the technical feasibility and economic viability of near-zero emission coal-based generation. Construction of FutureGen was due to start in 2009, for operation in 2012.

Coal gasification processes –

(a) In conventional plants coal, often pulverised, is burned with excess air (to give complete combustion), resulting in very dilute carbon dioxide at the rate of 800 to 1200 g/kWh.

(b) Gasification converts the coal to burnable gas with the maximum amount of potential energy from the coal being in the gas.

(c) In Integrated Gasification Combined Cycle (IGCC) the first gasification step is pyrolysis, from 400°C up, where the coal in the absence of oxygen rapidly gives carbon-rich char and hydrogen-rich volatiles.

(d) In the second step the char is gasified from 700°C up to yield gas, leaving ash. With oxygen feed, the gas is not diluted with nitrogen.

(e) The key reactions today are C + O₂ to CO, and the water gas reaction: C + H₂O (steam) to CO & H₂ - syngas, which reaction is endothermic.

(f) In gasification, including that using oxygen, the O₂ supply is much less than required for full combustion, so as to yield CO and H₂.

(g) The hydrogen has a heat value of 121 MJ/kg - about five times that of the coal, so it is a very energy-dense fuel.

(h) However, the air separation plant to produce oxygen consumes up to 20% of the gross power of the whole IGCC plant system.

(i) This syngas can then be burned in a gas turbine, the exhaust gas from which can then be used to raise steam for a steam turbine, hence the "combined cycle" in IGCC.

(j) To achieve a much fuller clean coal technology in the future, the water-shift reaction will become a key part of the process so that:

(i) C + O₂ gives CO, and

(ii) C + H₂O gives CO & H₂, then the

(iii) CO + H₂O gives CO₂ & H₂ (the water-shift reaction).

(k) The products are then concentrated CO₂ which can be captured, and hydrogen. (There is also some hydrogen from the coal pyrolysis), which is the final fuel for the gas turbine.

(k) Overall thermal efficiency for oxygen-blown coal gasification, including carbon dioxide capture and sequestration, is about 73%.

(l) Using the hydrogen in a gas turbine for electricity generation is efficient, so the overall system has long-term potential to achieve an efficiency of up to 60%.

Clean coal technology (CCT) – To mitigate Global warming and climate change - A discussion

Clean coal technology (CCT) – To mitigate Global warming and climate change - A discussion

Coal when burned is the dirtiest of all fossil fuels. A range of technologies are being used and developed to reduce the environmental impact of coal-fired power stations. Thus, clean coal technology (CCT) is the name attributed to coal chemically washed of minerals and impurities, sometimes gasified, burned and the resulting flue gases treated with steam with the purpose of removing sulfur dioxide, and reburned so as to make the carbon dioxide in the flue gas economically recoverable.

A. It is a known fact that, the burning of coal, a fossil fuel, is the principal causes of anthropogenic climate change and global warming. In fact, the byproducts of coal combustion are very hazardous to the environment if not properly contained. This is seen to be the technology's largest challenge, both from the practical and public relations perspectives. While it is possible to remove most of the sulfur dioxide (SO2), nitrogen oxides (NOx) and particulate (PM) emissions from the coal-burning process, carbon dioxide (CO2) emissions will be more difficult to address. Therefore, fact regarding the coal remains:

(a) Coal is a vital fuel in most parts of the world.

(b) Burning coal without adding to global carbon dioxide levels is a major technological challenge which is being addressed.

(c) The most promising "clean coal" technology involves using the coal to make hydrogen from water, then burying the resultant carbon dioxide by-product and burning the hydrogen.

(d) The greatest challenge is bringing the cost of this down sufficiently for "clean coal" to compete with nuclear power on the basis of near-zero emissions for base-load power.

B. In relation to clean coal technology, a terminology ‘carbon capture and storage’ (CCS) is being discussed. CCS is nothing but method of capturing the carbon dioxide, preventing the greenhouse gas entering the atmosphere, and storing it deep underground by various ways, such as

(a) CO2 pumped into disused coal fields displaces methane which can be used as fuel,

(b) CO2 may be pumped into and stored safely in saline aquifers, or

(c) CO2 pumped into oil fields helps maintain pressure, making extraction easier.

A range of approaches of CCS have been developed and have proved to be technically feasible. They have yet to be made available on a large-scale commercial basis because of the costs involved.

C. Clean coal technologies are continually developing. Today, efficiencies of 46% can be achieved by implementing the best available technology. With further research into techniques such as Ultra-supercritical combustion, efficiencies above 50% are envisaged in the near future. Work is underway to exploit the opportunities of capturing and storing CO2, which is an inevitable by-product of the thermal use of all fossil fuels. Coupled with integrated gasification, coal could in this way provide a source of low-carbon hydrogen for fuelling transport without producing local emissions. There will be challenges in bringing these technologies to market, but with the right mix of research investment and market incentives, coal may stake a place in a sustainable and secure energy future.

D. To summarise, burning coal, such as for power generation, gives rise to a variety of wastes which must be controlled or at least accounted for. So-called "clean coal" technologies are a variety of evolving responses to late 20th century environmental concerns, including that of global warming due to carbon dioxide releases to the atmosphere. However, many of the elements have in fact been applied for many years, and they will be only briefly mentioned here:

(i) Coal cleaning by 'washing' has been standard practice in developed countries for some time. It reduces emissions of ash and sulfur dioxide when the coal is burned.

(ii) Electrostatic precipitators and fabric filters can remove 99% of the fly ash from the flue gases - these technologies are in widespread use.

(iii) Flue gas desulfurisation reduces the output of sulfur dioxide to the atmosphere by up to 97%, the task depending on the level of sulfur in the coal and the extent of the reduction. It is widely used where needed in developed countries.

(iv) Low-NOx burners allow coal-fired plants to reduce nitrogen oxide emissions by up to 40%. Coupled with re-burning techniques NOx can be reduced 70% and selective catalytic reduction can clean up 90% of NOx emissions.

(v) Increased efficiency of plant - up to 45% thermal efficiency now (and 50% expected in future) means that newer plants create less emissions per kWh than older ones.

(vi) Advanced technologies such as Integrated Gasification Combined Cycle (IGCC) and Pressurised Fluidised Bed Combustion (PFBC) will enable higher thermal efficiencies still - up to 50% in the future.

(vii) Ultra-clean coal from new processing technologies which reduce ash below 0.25% and sulfur to very low levels mean that pulverised coal might be fed directly into gas turbines with combined cycle and burned at high thermal efficiency.

(viii) Gasification, including underground gasification in situ, uses steam and oxygen to turn the coal into carbon monoxide and hydrogen.

(ix) Sequestration refers to disposal of liquid carbon dioxide, once captured, into deep geological strata.

E. Discussion - Many experts think, the concept of clean coal is said to be a solution to climate change and global warming. Whereas, environmental groups believe it is nothing but another way of making everybody fool, in other words, it is ‘green-wash’. Environmentalists say, with this technology emission and wastes are not avoided, but are transferred from one waste stream to another. They opine that, coal can never be clean. Critics of the planned power plants assert that there is no such thing as "clean coal" and that the plant will still release large amounts of pollutants compared to renewable energy sources such as wind power and solar power. A good deal of investment in research and development and also in implementation of pollutant free renewable energy (such as wind power and solar power) has to augmented, to make the world very clean, to make the required electricity generation fully green.